Haian UV LED Blacklight Fixtures,3 Color Modes,5W Portable USB Black Light Lamp for Glow Party,Halloween and Blacklight Parties, UV Poster,Warm White Fluorescent Lamp for Cabinet,Living Room,Bedroom
Share Facebook Twitter Pinterest Email

Haian UV LED Blacklight Fixtures,3 Color Modes,5W Portable USB Black Light Lamp for Glow Party,Halloween and Blacklight Parties, UV Poster,Warm White Fluorescent Lamp for Cabinet,Living Room,Bedroom

Brand: Haian Support
Product Code: LD18877
Availability: In Stock
US$9.00
-+

*【3 Color Modes】The lamp has 3 brightness,UV,UV&Warm White mixed,Warm White.You can adjust the brightness as you need.

*【Widely Application】UV black light lamp can be widely used for UV body paint/poster,UV art,neon paint art,fluorescent paints,glow party,Halloween party,DJ stage,stain detector,room hotel.Warm White(3000K) can be widely used for kitchen, laundry, closet, garage, under counter and MORE.

*【USB Driven】Have convenient USB design.You can connect it to a power or laptop and light it up,it equipped with wires and switches.Follow the instructions to operate quickly and easily.

*【Safety】 DC 5V voltage design to keep you away from electric shock.395-400nm wavelength,low power consumption,high safety factor and quite stable light output.

*【AFTERSALES SERVICE】We will fully responsible for any quality issue for our products and your opinions will make us better.

Features
Portable USB Dimming Strip /Bar Light with 3 Colors Modes
Safe,light-weight and convenient to operate and install
Low power consumption and save electricity bill.
Specification
Power: 5W
Color: Warm white(3000K),UV,UV&warm white mixed colors
Luminous flux: 480-550 Lumen
Input Voltage: DC 5V 1A
UVA Level: 395-400nm
Length of Power Cord: 6.5ft
Size:12.4inch/315mm length,0.61inch/15.5mm width,0.39inch/10mm high
Notes
This bulb is NOT waterproof, please keep it away from water or rain.
Package Include
1*UV LED light tube and Power cord with switch
Accessories(Including spare parts)
2*Screws;
4*Round double-sided adhesive
2*Magnet
4*Round iron sheets
4*Wire clamp
(without USB power adaptor and User Manual)
Installation instructions
Please note:How to open the magnet? Push hard to the right push hard to the left
1.Put the screws through the mounting holes at both ends of the product, hold them with your fingers, and tighten the magnet to the screws
2. Tear down the backing paper on one side of the double-sided tape, and stick the double-sided tape and the iron sheet together.
3.Adhere the iron sheet with double-sided tape to the magnets installed at the two ends of the lamp tube at the first step, and tear down the bottom paper on the other side of the double-sided tape;
4.Clean the position to be installed, paste the lamp tube and press for three minutes
5.Tear off the backing paper of the wire clamp, stick it to the place where the wire passes, and clip the wire into the slot of the wire clamp
Welcome to visit our store:
www.this webshop/shops/haiansupport

Light Decor,ready-to-ship (RTS) online retailer,bulk & wholesale and OEM/ODM e-shop of light decoration © 2024