Yueximei UV LED Black Light Bar Fixtures,3 Color Modes,5W,Portable USB Dimming Light Warm White,UV,UV&Warm White Mixed Colors Lamp for Cabinet,Living Room,Bedroom,Reading Room,Blacklight Party,1 Pack
*UNIQUE DESIGN：UV&Led strip light,adjust 3 kinds of brightness(UV,warm white 3000K,UV&warm white mixed colors) freely according to your needs.it can replace light bulbs.This is a light bar with a transparent shell,dimming light can provide you with a better dimming experience.
*WIDE APPLICATION：This 5W UV&LED light bar/strip is no limit towards its applications,super portable and light-weighted,plug and play.Magnetic led light strip，led light bar or black light bar can be used for living room,bedroom,under cabinet lighting kitchen, desk,study and party,you can put it to anywhere you want.
*USB DRIVEN AND EASY INSTALLATION:Have convenient USB design.You can connect it to a power or laptop and light it up,it equipped with wires and switches.Follow the instructions to operate quickly and easily.
*GOOD QUALITY: 395-400nm wavelength,low power consumption,high safety factor and quite stable light output.
*AFTERSALES SERVICE:We will fully responsible for any quality issue for our products and your opinions will make us better.
Yueximei UV& LED Light Fixtures
Features
Portable USB Dimming Strip /Bar Light with 3 Colors Modes
Safe,light-weight and convenient to operate and install
Low power consumption and save electricity bill.
Specification
Power: 5W
Color: Warm white(3000K),UV,UV&warm white mixed colors
Luminous flux: 480-550 Lumen
Input Voltage: DC 5V 1A
UVA Level: 395-400nm
Length of Power Cord: 6.5ft
Size： 12.4inch/315mm length，0.61inch/15.5mm width，0.39inch/10mm high
Notes
This bulb is NOT waterproof, please keep it away from water or rain.
Package Include
1*UV LED light tube and Power cord with switch
Accessories（Including spare parts）
2*Screws;
4*Round double-sided adhesive
2*Magnet
4*Round iron sheets
4*Wire clamp
(without USB power adaptor and User Manual）
Installation instructions
Please note： How to open the magnet? Push hard to the right push hard to the left
1.Put the screws through the mounting holes at both ends of the product, hold them with your fingers, and tighten the magnet to the screws
2. Tear down the backing paper on one side of the double-sided tape, and stick the double-sided tape and the iron sheet together.
3.Adhere the iron sheet with double-sided tape to the magnets installed at the two ends of the lamp tube at the first step, and tear down the bottom paper on the other side of the double-sided tape;
4.Clean the position to be installed, paste the lamp tube and press for three minutes
5.Tear off the backing paper of the wire clamp, stick it to the place where the wire passes, and clip the wire into the slot of the wire clamp
About Szbright
Szbright, focuses on creating the best lighting experience. Only high end LED and advanced optical design are adopted. Enjoy lighting with Szbright.
Welcome to visit our store:
www.this webshop/shops/Szbright-direct
