Cinlitek LED Strip Lights, LED TV Backlight 6.56ft for 40-60in Television USB TV Backlight Kit with Remote, 16 Color 5050, HDTV Bias Lamp, Waterproof Bias Lighting Led Light Strip for TV Desktop PC

16 different light colors to choose freely4 dynamic light modes to meet your requirementLight brightness can be adjustedPowered by USB port directly, plug and playApplied to your HDTV, desktop PC, PC monitor and elsewhereEasy to install with adhesive tapeYou can cut the LED strips along with cutting marks for customized fitSupply voltage: DC 5V 1AUSB cable length: 1m/3.28ftTotal length: 2m/78.7inLED quantity: 64 LEDsLight color: 20 static colorsLight mode: 4 modesRemote control: IR remote controlNumber of key: 24Control distance: 8m/26.2ftFunctions: Dynamic speed adjusting, dynamic mode adjusting, static color adjusting, direct color selection, and brightness adjustingRemote control powered by: 1*CR2025 button cell(included)The Arrow on the connector must be aligned with "+5V" on the light strip, otherwise it won’t work.When the lamp color is one of 16 colors, the DIM+/DIM- key is brightness adjustment, when the lights in four modes, the DIM+/DIM- key is speed adjustment.When using the remote control, the remote control is facing the infrared signal receiver, otherwise the remote control will not work.Please cut the LED light along the white line (cutting marks) for customized length (If you need).And the snipping parts Can Not be used anymore.When the electric current reaches 0.3A – 0.5A, the controller can work normally, and when it is lower than 0.3A, the controller cannot work. So when this LED strip light doesn’t work, please try to connect the strip light to a fully charged Power bank or USB computer jack to check whether it work or not.Step 1. Clean the back side of your HDTV with wet cloth and let it natural air dry;Step 2. Peel off one side of the adhesive tape;Step 3. Stick it to the back side your HDTV/desktop monitor;Step 4. Connect the USB connector to power on.