Floor Lamp, SZGMJIA LED WiFi Smart Floor Light with 1-100% Brightness Dimmable & 4 Colors Temperatures, 25W, Eye-Caring Dimmable Reading Standing Lamp for Sewing Living Room Bedroom Office

What's in the Box

? 1 set * 25W LED WiFi Smart Intelligent Floor Lamp

? 1 set * Installation Accessories

? 1 set * Installation & Operation Guide

Before Assembly

1: Inspect lamp before beginning assembly. Wire connections have been made at the factory and the lamp is ready for assembly.

2: Remove all packing materials from the lamp.

3: To prevent bad connections, avoid pulling wiring connections when re-moving contents from package or during installation.

4: Lay out all the parts on a flat surface.

5: The floor lamp consists of seven parts: 1xLamp Head, 4xPole, 1xLamp Base, 1xElectric Wire with Adapter.

Assembly Intruction

1: Place the lamp base on a flat surface, then screw each two parts clock-wise in order.

Note:

a: Please take care not to pinch or damage the wires.

b: For better installation, please tighten the bottom pole and lamp base firstly.

c: Make sure each section of tubes are tightened.

2: Plug adapter into outlet so that the floor lamp will be work.

Adjustment

For the best performance, please adjust the floor lamp position to directly above your area of reading/working.

Warning:

1: Cut off the power before installation.

2: Assemble the lamp according to the instructions and do not rebuilt.

3: Assemble, take apart or move the lamp gently.

4: Please do not cover anything on the lamp head and avoid bending and bumping the lamp pole.